Guangzhou Leyte Electronic Co.,Limited

LT-8000B patient monitor     

Features:

l 12.1'' screen with true color, wide viewing angle, high brightness LCD display.

l HR/PR, NIBP, RR, ECG, SpO2, TEMP

l Simple and friendly operating display interface.

l Rechargeable lithium battery provides convenience for patients' moving.

l Playback and browse function for long term waveform and monitor data record.

l Optional printing output function, alarm triggers printing.

l Auto double alarm with audible and visible signals

l Anti-defibrillation, anti-interference from high frequency electric knife

l A full-synchronistic lead multi-channel ECG display...

l This medical equipment can be used in ICU, CCU and operation room.

l Suitable for adult,pediatrics and neonate patients.

Standard configuration:

l HR/PR, NIBP, RR, ECG, SpO2, TEMP, Rechargeable lithium battery

Optional:

l Dual TEMP

l Dual IBP

l ETCO2

l Thermal recorder

l Wall mount

l Trolley

Specification:

ECG

Lead configuration

Standard 3-lead or 5-lead

3-lead   RA、LA、LL,Lead method:I,II,III

5-lead   RA、LA、LL、RL、V,Lead method:I,II,III,aVR,aVL,aVF,V

Increase

    ´250,´500,´1000,´2000

HR

Range

     Adult                    15 ~ 300bpm (beat/minute)

     Neonatal baby/children        15 ~ 350 bpm(beat/minute)

Precision   ±1% or ±1bpm,the larger prevails

Resolution     1 bpm(beat/minute)

Sensitivity

> 200 uV (Peak-to-peak value)

Input Impedance

> 5 (megohm)

Bandwidth

Diagnostic mode  0.05~130Hz

Monitoring Mode     0.5~40Hz

Operation mode  1~20Hz

Common Mode rejection Ratio

Diagnostic mode  > 90 dB

Monitoring Mode     > 100 dB

Operation mode  > 100 dB

Pole Polarization Vvoltage Range

±300mV

Pacing Pulse Test

Test pacing pulse in accordance with the following conditions:

Amplitude:  ±2 mV ~ ±700mV

Width:      0.1ms ~ 2ms

Risetime:       10us~100µs

Pacing pulse inhibition

When pacing analysis switch is on, pacing pulse in accordance with the following conditions are restrained, but affection against HR calculation.

Amplitude:  ±2 mV ~ ±700mV

Width:     0.1ms ~ 2ms

Risetime:      10us ~ 100µs

Baseline Recovering Time

After defibrillation< 3 seconds

Signal Range

±8 mV (Peak-to-peak value)

Calibrating Signal

1mV(Peak-to-peak value),precision ±5%

ST Segment Measuring Volume

Measuring range: -2.0mV ~ +2.0mV

Measuring precision: Ranging -0.8 mV~+0.8mV, measuring error is ±0.02mV or ±10%,. The larger prevails.

No definition for other ranges.

RESP

Measuring Method

RA-LL impedance

RESP Impedance Measuring Range

0.3~3Ω

Base Impedance Range

200~4000Ω

Bandwidth

0.1~2.5Hz

RESP Rate

Range

Adult             0~120BrPM

Children and neonatal baby 0~150 BrPM

Resolution        1 BrPM

Precision        ±2 BrPM

Asphyxia Alarm

10~40 seconds

NIBP 

Measuring Method

Pulse wave oscillometry

Work Mode

Manual/Automatic/STAT

Measuring Interval of Automatic Measuring Mode

1,2,3,4,5,10,15,30,60,90,120,180,240,480 minute(s)

Measuring Time of STAT Mode

5 minutes

PR range

40 – 240 bpm